Selected own publications:
[
1.
] B.Turčič, A.Krsová, M.Jirouš:"Fatigue of C/EP
Composites", report Z-85-5293, SVUM Prague 1985 (in Czech)
[
2.
] B.Turčič:"Fatigue of C/EP Composites", National
seminar of the Czechoslovak Society for Science and Technology Modern Composite Materials, Prague, 14.1.1986 (in Czech)
[
3.
] B.Turčič:"Research for Fatigue of Carbon
Composites", national seminar of the Czechoslovak Society for Mechanics Fatigue of Materials and Structures '86, Zinkovy, 5.5.-8.5.1986 (in
Czech)
[
4.
] B.Turčič:"Fracture Toughness of Acryl-Glass for
Aerospace Purposes", national seminar of the Czechoslovak Society for Mechanics
Methodical and Application Problems of Fracture Mechanics '86,
Zinkovy 28.10.-31.10.1986 (in Czech)
[
5.
] B.Turčič, P.Bradna, J.Hell:"Fatigue of C/EP
Composites", report Z-86-5515, SVUM Prague 1986 (in Czech)
[
6.
] B.Turčič:"Fatigue of C/EP Composites from Fibredux 914
C-TS Prepregs, Vol.I", report Z-87-5662, SVUM Prague 1987 (in Czech)
[
7.
] B.Turčič:"Fatigue of C/EP Composites", erratum
and amendment to reports Z-85-5293 a Z-86-5515, SVUM Prague 15.4.1987 (in
Czech)
[
8.
] E.Nezbedová, J.Hell, B.Turčič, M.Machková, Z.Převorovský,
V.Humen:"Brittle Fracture of PE pipes for Heating Gas Pipelines and Effects
of Gas Media on This Behaviour", report SVUM Z-88-5938, Prague 1988 (in
Czech)
[
9.
] B.Turčič:"Fatigue Damage of C/EP Composites from
Continuous Fibres", national seminar of the Czechoslovak Society for
Mechanics Fatigue of Materials and
Structures '88, Zinkovy, 3.-6.5.1988 (in Czech)
[
10.
] B.Turčič:"Effect of Sequences of Blocks of Loading
Cycles on Fatigue Life of C/EP Composites", report Z-88-5876, SVÚM Prague
1988 (in Czech)
[
11.
] B.Turčič:"Fatigue Damage of C/EP Composites",
Proceedings of the XVth international conference Reinforced Plastics '89, Karlovy Vary, 16.-18.5.1989, pp.130-136 (in
Czech)
[
12.
] B.Turčič:"Using Principles of Fracture Mechanics for
Testing Composite Laminates", National seminar of the
Czechoslovak Society for Mechanics Methodical
and Application Problems of Fracture Mechanics '89, Zinkovy 2.10.-6.10.1989
(in Czech)
[
13.
] B.Turčič:"Fatigue of C/EP Composites from Fibredux 914
C-TS Prepregs, Vol.II", report Z-89-6108, SVUM Prague 1989 (in Czech)
[
14.
] B.Turčič, A.Krsová:"Assessment of the Cause of Failure
of Four Gas-Pipeline Straight Tees from lPE", SVUM Prague 1990
(in Czech)
[
15.
] E.Nezbedová, J.Hell, B.Turčič, M.Machková, Z.Převorovský,
V.Humen:"Elaborating the Methods for Brittle Fracure Behavior of PE Pipes
for Heating Gas Pipelines incl. Methods for Effects of Gas Media on This
Behaviour", report SVUM Z-90-6231, Prague 1990 (in Czech)
[
16.
] B.Turčič:"Fatigue Damage Periods in Composite
Laminates", Materials Science and
Engineering A130(1990), 17-20
[
17.
] B.Turčič:"'Natural' Phenomenological Fatigue
Damage Cumulation Model for Composite Laminates", Materials Science and Engineering A130(1990), 21-27
[
18.
] B.Turčič:"Interlaminar Fracture Toughness of C/EP
Composites", National seminar of the Czechoslovak Society for Mechanics
Methodical and Application Problems of Fracture Mechanics '91,
Zinkovy 1.10.-3.10.1991 (in Czech)
[
19.
] E.Nezbedová, J.Hell, B.Turčič, A.Krsová, J.Pscheidt.,
P.Jarosil:"Research for Brittle Fracture Behaviour and Corrosion-Stress
Cracking Resistance of the Selected Types of linear-PE", report SVUM
Z-91-6481, Prague 1991 (in Czech)
[
20.
] E.Nezbedová, J.Hell, B.Turčič, A.Krsová:"Research for
Brittle Fracture Behaviour of Pipe-Types of lPE Regarding Their Long-Term
Strength and Toughness at Low Levels of Loading", report SVUM Z-92-6527,
Prague 1992 (in Czech)
[ 21.] F.Ulrych, M.Sova, J.Vokrouhlecký, B.Turčič:"Empirical Relations of the Mechanical Properties of Polyamide-6 Reinforced with Short Glass fibers", Polymer Composites 14(1993)3, 229-237
[
22.
] B.Turčič:"Fatigue Damage Cumulation and Life
Prediction of C/EP Composite Laminates", XVII. International Conference Reinforced Plastics '93, Karlovy Vary, 27.-29.4.1993 (in Czech)
[
23.
] B.Turčič:"Slow Crack Iniciation and Propagation in
Polyolefines", National seminar of the Czechoslovak Society for Mechanics
Methodical and Application Problems of Fracture Mechanics '93,
Zinkovy 14.6-17.6.1993 (in Czech)
[
24.
] J.Křena, B.Turčič:"Fundamental Questions of
Application of Composite Materials for a Rail Wheel Set", JOK/BMT, Prague
26.9.93 (in Czech)
[
25.
] B.Turčič:"Strength Problems of Cervical Dilator
DILAPAN and Their Solution Proposal", report BMT 007/1/93, Prague 4.10.1993
(in Czech)
[
26.
] J.Křena, B.Turčič:"Application of Composite Material
for a Rail Wheel I.", report JOK 001/ZDB/94 & BMT 008/2/93, Prague 1994 (in
Czech)
[27.
] J.Křena, B.Turčič:"Application of Composite Material
for a Rail Wheel II.", report JOK 002/ZDB/94 & BMT 009/1/94, Prague 1994 (in
Czech)
[
28.
] B.Turčič:"Fatigue Damage of C/EP Composites",
National seminar of the Czech Society for Mechanics Fatigue
of Materials and Structures '94, Zinkovy, 9.-12.5.1994 (in Czech)
[
29.
] B.Turčič:"Preparation of a Project for Manufacturing
Large Composite Parts - selection of an suitable approach", report BMT
010/2/94, Prague 18.11.1994 (in Czech)
[
30.
] B.Turčič:"Statistical Evaluation of Fatigue Life
Data", progress report of R&D program EC JOULE II (3.A.2.,
JOU2-CT92-0085), SVUM Prague, November 1994
[
31.
] B.Turčič:"Wind Turbines - Europe 1994", report
BMT 012/4/94, Prague 26.1.1995 (in Czech)
[
32.
] B.Turčič:"Continuing the Long -Term Tests of Slow
Crack Growth in PE for Gas Pipes", National seminar of the Czechoslovak
Society for Mechanics Methodical and Application Problems of Fracture Mechanics '95,
Zinkovy 16.-18.5.1995 (in Czech)
[
33.
] B.Turčič:"Fatigue Testing of Gl/Ep [+ - 45]S
Coupons", progress report of the R&D program EC JOULE II (3.A.2.,
JOU2-CT92-0085), SVUM Prague, May 1995
[
34.
] B.Turčič:"Statistical Evaluation of Strength and
Fatigue Life Data of Glass-Reinforced Laminates", report BMT 014/2/95,
Prague 30.6.1995
[
35.
] B.Turčič:"Statistical Evaluation of Fatigue Life of M1
and M2 Data", progress report of R&D program EC JOULE II (3.A.2.,
JOU2-CT92-0085), BMT 014/2/95, Prague, 1995
[
36.
] B.Turčič:"Assessment of Practical Failure of PVC-
Water Distribution Pipeline", report BMT 019/7/95, Prague 30.11.1995 (in
Czech)
[
37.
] B.Turčič:"Comparative Shear Strength Tests of Adhesive
Bonded Steel-Steel Joints, Bonded by Instant Adhesives", report BMT
020/8/95, Prague 13.12.1995 (in Czech)
[
38.
] B.Turčič:"Composite Pushrod for Valve Train of an
Combustion Engine", report BMT 021/1/96, Prague 19.3.1996 (in Czech)
[
39.
] B.Turčič:"Elastic - Strength Properties of Structural
PP Foams Mosten", report BMT 022/2/96, Prague 10.4.1996 (in Czech)
[
40.
] B.Turčič:"On statistical bounds of fatigue life
curves", National seminar of the Czech Society for Mechanics Fatigue of Materials and Structures '96 Zinkovy, 21.-23.5.1996 (in
Czech)
[
41.
] B.Turčič:"Effect of Prestraining and of Welded Joints
in Steel Sheets on Their Fatigue Strength and Life", report BMT 024/4/96,
Prague 30.6.1996 (in Czech)
[
42.
] B.Turčič:"Strength and Fatigue of Light Alloys",
report BMT 026/6/96, Prague 30.8.1996 (in Czech)
[
43.
] B.Turčič:"Surface Treatments for Improving Fatigue
Resistance of Steel Parts", report BMT 027/7/96, Prague 25.9.1996 (in
Czech)
[
44.
] B.Turčič, J.Křena:"A Rail Wheel of an
Unconventional Concept", report BMT Prague 17.11.1996 (in Czech)
[
45.
] B.Turčič:"Fatigue Strength Estimation of Composite
Material for Shaft Bellows-Coupling", report BMT 040/12/97, Prague
24.3.1997 (in Czech)
[
46.
] Z.Převorovský, M.Landa, B.Turčič:"Acoustic Microscopy
Characterisaton of Fatigue Damage in Carbon Composites", IX. international
conference Reinforced Plastics '97,
Karlovy Vary 14.5.1997 (published separately, not in the Proceedings) (in Czech)
[
47.
] B.Turčič:"Strength and Fracture of Glass", report
BMT 049/12/97, Prague 29.7.1997 (in Czech)
[
48.
] B.Turčič:"Development of a Composite Rail Wheel",
display report BMT, Prague 4.2.1998 (in Czech)
[
49.
] B.Turčič:"Composite Spar Head with Holes for a Pin
Joint I.", report BMT 082/4/98/1, Prague 15.4.1998 (in Czech)
[
50.
] B.Turčič:" Composite Spar Head with Holes for a Pin
Joint II.", report BMT 082/4/98/2, Prague 14.5.1998 (in Czech)
[
51.
] B.Turčič:"Mechanical-Thermal Properties of Flat Glass
in Dependence on Temperature", report BMT 081/3/98, Prague 22.5.1998 (in
Czech)
[
52.
] B.Turčič:"Conceptual Design Possibilities for Joining Sections of a Composed Composite Mast", report BMT 085/6/98/1, Prague
30.9.1998 (in Czech)
[
53.
] B.Turčič:"Possibility of Using the Thick Wedge Inlay
and the Outer Bandage on the Main Spar Head for the Pin-Joint", report BMT
082/4/98/3, Prague 28.4.1999 (in Czech)
[
54.
] B.Turčič:"Materials Selection for a
Post-Grinder", report BMT 101/12/99, Prague 7.5.1999 (in Czech)
[
55.
] O.Uher, B.Turčič, M.Růžička:"Design and Manufacturing
of the Main Spar for a Hang-Glider", XX. international conference Reinforced
Plastics '99, Karlovy Vary 25.-27.5.1999 (in Czech)
[
56.
] M.Černý, B.Turčič, M.Růžička, O.Uher:"Comparison of
Elastic Constants of the Filament Wound Tubes Determined by Electrodynamic
Resonant Method and by Classical Methods", XX. international conference Reinforced
Plastics '99, Karlovy Vary 25.-27.5.1999 (in Czech)
[
57.
] B.Turčič:"Filament-Wound Post Grinder with Optimalised
Lay-Up", report BMT 101/12/99/2, Prague 6.10.1999 (in Czech)
[ 58. ] B.Turčič:"Tensile Stress-Strain Behaviour of the Al-alloy DIN 3.2315 F31", report BMT 109/20/99, Praha 22.12.1999 (in Czech)
[
59.
] B.Turčič:"Composite Spinnaker Pole for BT Challenge 2000
- Optimization of the Lay-Up", brief report BMT 110/21/99/1, Prague 13.1.2000
[
60.
] B.Turčič:"Fatigue Properties of the Steels 14224
and 15260", report BMT 111/1/00/1, Prague 26.1.2000 (in Czech)
[
61.
] B.Turčič:"Fatigue Properties of the Steel 14224", report BMT 111/1/00/2, Prague 3.2.2000 (in Czech)
[
62.
] B.Turčič:"The Composite Spinnaker Pole for
BT Challenge
2000 - Optimization of the Lay-Up", report BMT 110/21/99/2, Prague 4.4.2000
[
63. ] B.Turčič:"Strength
Criteria of Laminates and their Problems", seminar Fatigue of Materials and Structures 2000,
Zinkovy (Czech Republic), May 15-18, 2000
[
64.
] B.Turčič:"Re-Check of the Composite Spinnaker Pole for
BT Challenge 2000", report BMT 110/21/99/3, Prague 18.7.2000
[
65.
] B.Turčič:"Composite Flexible Coupling - 1st
solutions", report BMT 115/5/00, Prague 24.9.2000
[
66. ] B.Turčič:"Fiber
Pattern Optimisation of the Composite Structural Parts", XXI. International
conference on Reinforced Plastics '01,
hotel Thermal, Karlovy Vary, May 22-24, 2001
[
67. ] B.Turčič:"Engineering
Fatigue Damage Cumulation Model for Composites", International conference
on Composites
in Material and Structural Engineering,
Praha, June 3-6, 2001
[ 68. ] B.Turčič:"Potential Technological Applications of Composites with Poly-Siloxane Matrix", report for USMH (IRSM) AV CR, Praha, November 15, 2001
[
69.
] B.Turčič:"Engineering
Fatigue Damage Cumulation Model for Composites", seminar Fracture and Fatigue 2002,
Žinkovy (Czech Republic), April 23-25, 2002
[
70.
]
B.Turčič:"Optimization of the Composite Structural Parts",
conference on Modern Methods in a Mechanical Development, hotel Achát, Janov nad
Nisou (Czech Republic), May 22-23, 2002
[
71.
] B.Turčič:"Technological
Analysis of Using Polymer Materials for Gears", report BMT 128/4/02,
Prague, 15.9.2002
[
72.
] B.Turčič:"Fatigue
Life Prediction in Design of the Composite Components", conference on
Modern Methods in Mechanical Development, hotel Achát, Janov nad
Nisou (Czech Republic), May 28-29, 2003
[
73.
] B.Turčič:"Possibilities
of the Optimization of Composite Plates",
XXII. international
conference Reinforced Plastics
'03,
hotel Thermal, Karlovy Vary, May 20-22, 2003
[
74.
] B.Turčič:"Optimization
of the Composite Pressure Vessels", seminar Fracture and Fatigue 2004,
Žinkovy (Czech Republic), April 20-22, 2004
[
75.
]
B.Turčič:"Filament-Wound Pressure Vessels",
conference on Modern Methods in Mechanical Development, hotel Achát, Janov nad
Nisou (Czech Republic), May 12-13, 2004
[ 76. ] N.Chawla, K.K.Chawla, B.Turčič:"An Evaluation of Fatigue Behavior of High Performance Ceramic Fibers", XXIII. international conference Reinforced Plastics '05, hotel Thermal, Karlovy Vary, May 24-26, 2005
[ 77. ] B.Turčič:"Strength Assessment of the C/EP press rolls", report BMT 156/5/05, Prague 26.7.2005
[
78. ] M.Růžička,
K.Blahouš, V.Kulíšek, B.Turčič:"Strength of Lugs from
C-Fibers", XXIV. International
Conference Reinforced Plastics '07,
hotel Thermal, Karlovy Vary, May 22-24, 2007
[79. ]
B.Turčič:"Analytical Methods in Design of Composite Structural
Parts", seminar ‘Design and Analysis of Composite Structures‘, FS
ČVUT Praha, March 13, 2008
[80. ] M.Růžička, V.Kulíšek, B.Turčič, K.Blahouš:"Static and Fatigue Tests of Lugs from C-Fibers", seminar ‘Fatigue and Fracture Mechanics 2008‘, Žinkovy, Czech Republic, April 15-16, 2008
Utility Models and Patents:
"Extensometer", patent No. CZ240223 (1986)
"Track Wheel", patent No. CZ280998 (1997)
"Shank of Grinding Wheel Spindle Adapter", utility model CZ9704152 (1998)
Home - Contact - Company - Services - Optimization - Clients - Examples